I spent a couple of hours today fairing all the taped seams prior to glassing the hull. I first hit all the edges with my Makita grinder/sander/polisher and then went back with epoxy mixed with fairing filler. The trick is to not put on too much because you'll have to sand it all off again. You need just enough to hide the tape seams under the final layer of glass. I did the keel seam, chine shelf seams, every scarf, the bow and the transom seams. Now I just have to wait a couple of days for the epoxy to get hard enougy to sand well. That means that next weekend I should be able to get the final layer of glass on.
Next steps:
1) Bottom strakes
2) Splash Rails
3) Finding a trailer
4) Roll-over Party